AMPERE 4 Channel Constant Voltage RF Receiver

$75.00
Write a Review
SKU:
AM-4CHRF-RGBW
Condition:
New
Availability:
In stock. Large quantities available for bulk orders. Contact us for inquiries.
Shipping:
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
4 Channel Constant Voltage Controller for CCT or RGB/W Dimming and Adjustment. One receiver can be paired with max 8 remote controls. If you use multiple receivers, you have two choices.

CAUTION!

LOW VOLTAGE PRODUCTS (12V/24V) ARE NOT COMPATIBLE WITH HIGH VOLTAGE (100V/277V).

DO NOT INSTALL LOW VOLTAGE INTO HIGH VOLTAGE.

 

4 channel RF LED dimmer used with remotes to control RGB/W LED strips. Works with 12-36V LED strips. Works with any of our RGB/W remotes. Each channel supports up to 5 amps of output current. 

RF receivers allow you to control LED strips using a simple controller. This allows you to put LED strips in out-of-reach places and prevents you from having to install a switch to control the lights. With a maximum 5 amps per channel and a total power output of up to 900W, you can install multiple LED strip lights on the same receiver to all be controlled with the same remote. Accepts an input of 12-36V, giving you flexibility over what voltage you want your LED strips to be. Make sure to supply the RF receiver with the same voltage as your LED strips need. Using the wrong input voltage can lead to problems, including shorter LED lifespans or LEDs not turning on. 

Eligible for Type C Rebates!

These drivers are Type C eligible, which makes them eligible for some of the largest rebates available from Xcel Energy.

Radio Frequency 869.5/916.5/434MHz

SPECIFICATIONS
NO. Input Voltage Output Current Output Power Remarks Size(LxWxH)
1 12-48VDC 4x5A 4x(60-240)W Constant voltage 178x46x22mm
2 12-48VDC 4x350mA 4x(4.2-16.8)W Constant current 178x46x22mm
3 12-48VDC 4x500mA 4x(6-24)W Constant current 178x46x22mm
4 12-48VDC 4x700mA 4x(8.4-33.6)W Constant current 178x46x22mm

What do these mean?